Installation
Required an increased height with respect to the finger-board, allowing enough space for proper oscillation of the strings.
It is important that the saddle notches and nut slots are sufficiently wide so as not to crimp the strings; We recommended the use of a small amount of graphite.
The special patented textile at the end of the strings will influence the sound of your instrument in a positive way and allows Velvet to be easily and securely adapted to any tailpiece. |
| |
What is the principle difference with Velvet strings?
We have defined the tension level of all Velvet strings considerably lower than other manufacturers. The choice of materials and design of the strings permit this luxury without loss of definition or strength to the contrary:
the lower tension relieves your instrument, giving it back its original spatial dimension, intensifying the sound radiation and enlarging the sound volume. |
| |
It is possible to mix Velvet strings with other strings?
Mixing our strings with those of other manufacturers should not be considered, since our principle of balance would not be achieved and the benefits as described previously would not come into effect.
|
| |
Do Velvet strings require special treatment?
Velvet strings do not require special treatment.
It is normal to find small stains on the surface due to weather conditions or perspiration. Regularly wipe the strings down to remove any residue.
Periodically clean the strings by wiping them with a cloth dipped in rubbing alcohol. |
